Application Examples
7.
Push the
Sources Ch1-Ch2
option button to display a new waveform that is
the difference between the displayed waveforms.
8.
To adjust the vertical scale and position of the Math waveform, follow these
steps:
a.
Remove the channel 1 and channel 2 waveforms from the display.
b.
Turn the channel 1 and channel 2
Vertical Scale
and
Vertical Position
knobs to adjust the vertical scale and position of the Math waveform.
For a more stable display, push the
Single
button to control the acquisition of
the waveform. Each time you push the
Single
button, the oscilloscope acquires
a snapshot of the digital data stream. You can use the cursors or automatic
measurements to analyze the waveform, or you can store the waveform to analyze
later.
Viewing Impedance Changes in a Network
You have designed a circuit that needs to operate over a wide temperature range.
You need to evaluate the change in impedance of the circuit as the ambient
temperature is changed.
Connect the oscilloscope to monitor the input and output of the circuit and capture
the changes that occur as you vary the temperature.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
