Reference
Video signal options
Details
Even Fields
Displays several
fi
elds and the oscilloscope triggers only on
even numbered
fi
elds
Undo Autoset
Causes the oscilloscope to recall the previous setup
NOTE.
Video autoset sets the Display Type option to Dot Mode.
Enable (EDU models only)
To further enhance the EDU models’ value in your educational environment,
you can disable the EDU oscilloscope Autoset function. For example, in
beginning labs where it is important for a student to learn the basic operation of
the oscilloscope, disabling Autoset will help them apply their knowledge of an
oscilloscope's operation instead of taking shortcuts with the Autoset button.
This feature is password controlled so Autoset can be disabled or enabled by
pushing the front-panel
Utility
►
on the side menu page 1
- more - page 1 of 3
on the side menu page 2
►
Autoset Enable Setting
. Then on the side menu push
either
Autoset Enable
or
Autoset Disable
and enter the appropriate password.
The factory default password is “1946”. The oscilloscope accepts passwords
with four characters or digits. You can change the password with the
Change
Password
item in the autoset side menu.
Counter
Use the counter function from the
Function
button menu to simultaneously
monitor two different signal frequencies. This feature provides a more accurate
reading than is available with the oscilloscope’s frequency measurement.
Options
Settings
Comments
Ch1
On, Off
Ch2
On, Off
Ch1 Trigger
Use the multipurpose knob to set the
trigger level.
Ch2 Trigger
Use the multipurpose knob to set the
trigger level.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading