Tektronix ATEC TekRanger 2 User Manual Download Page 86

Page: 86 / 174

Testing A Fiber

2–18

TFS3031 TekRanger/TekRanger 2 User Manual

Zoom. The Zoom option sizes the zoom window for magnification.
When Zoom is selected:

The arrow key contracts the zoom window horizontally.

The arrow key expands the zoom window horizontally.

The

arrow key expands the zoom window vertically.

The

arrow key contracts the zoom window vertically.

Trace. The Trace option shifts the waveform on the screen for
optimum viewing. When Trace is selected:

The arrow key shifts the waveform left.

The arrow key shifts the waveform right.

The

arrow key shifts the waveform upward.

The

arrow key shifts the waveform downward.

Table. In the event table, the Table option allows selection of events,
and shifts the viewing of columns of measurement data.

The arrow key shifts the view of the event table left to display
columns of data that are currently off the left side of the screen.

The arrow key shifts the view of the event table right to
display columns of data that are currently off the right side of the
screen.

The

arrow key selects events upward in the table (closer to the

front panel).

The

arrow key selects events downward in the table (farther

from the front panel).

NOTE

. Additional

button options let you edit, store, and

print files. These options are explained in other parts of this manual.

Testing A Fiber

2–18

TFS3031 TekRanger/TekRanger 2 User Manual

Zoom. The Zoom option sizes the zoom window for magnification.
When Zoom is selected:

The arrow key contracts the zoom window horizontally.

The arrow key expands the zoom window horizontally.

The

arrow key expands the zoom window vertically.

The

arrow key contracts the zoom window vertically.

Trace. The Trace option shifts the waveform on the screen for
optimum viewing. When Trace is selected:

The arrow key shifts the waveform left.

The arrow key shifts the waveform right.

The

arrow key shifts the waveform upward.

The

arrow key shifts the waveform downward.

Table. In the event table, the Table option allows selection of events,
and shifts the viewing of columns of measurement data.

The arrow key shifts the view of the event table left to display
columns of data that are currently off the left side of the screen.

The arrow key shifts the view of the event table right to
display columns of data that are currently off the right side of the
screen.

The

arrow key selects events upward in the table (closer to the

front panel).

The

arrow key selects events downward in the table (farther

from the front panel).

NOTE

. Additional

button options let you edit, store, and

print files. These options are explained in other parts of this manual.

Summary of Contents for ATEC TekRanger 2















































































































































































Search results

Summary of Contents for ATEC TekRanger 2

Reviews:

Brands by name

Popular brands

Tektronix ATEC TekRanger 2, User Manual

Search results

Summary of Contents for ATEC TekRanger 2

Reviews:

Brands by name

Popular brands