manualshive.com logo in svg

Tektronix ATEC TekRanger 2, User Manual

Share
Download
Tektronix ATEC TekRanger 2 User Manual Download Page 21

TFS3031 TekRanger/TekRanger 2 User Manual

1–1

Port Functions

Laser
output
ports

9-pin RS232C serial port

Keyboard connector (on
upgraded instruments and
instruments with serial
numbers B030000 and above)

Optional 3.5 inch
floppy disk drive

Disk eject button

Dust caps and labeling omitted
from illustration

25-pin parallel port

Laser Output Port and Connector Adapter

Laser Output Port

The test fiber connects to the laser output port located on the side
panel. Light is emitted from the laser output port into the test fiber.

If both singlemode and multimode laser output ports are installed,
the singlemode port is in top position and multimode port in bottom
position. If one laser output port is installed, it will always be in the
bottom position. The ports are identified by label.

TFS3031 TekRanger/TekRanger 2 User Manual

1–1

Port Functions

Laser
output
ports

9-pin RS232C serial port

Keyboard connector (on
upgraded instruments and
instruments with serial
numbers B030000 and above)

Optional 3.5 inch
floppy disk drive

Disk eject button

Dust caps and labeling omitted
from illustration

25-pin parallel port

Laser Output Port and Connector Adapter

Laser Output Port

The test fiber connects to the laser output port located on the side
panel. Light is emitted from the laser output port into the test fiber.

If both singlemode and multimode laser output ports are installed,
the singlemode port is in top position and multimode port in bottom
position. If one laser output port is installed, it will always be in the
bottom position. The ports are identified by label.

Summary of Contents for ATEC TekRanger 2















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands