manualshive.com logo in svg

Tektronix ATEC TekRanger 2, User Manual

Share
Download
Tektronix ATEC TekRanger 2 User Manual Download Page 62

Setups

1–42

TFS3031 TekRanger/TekRanger 2 User Manual

RS232 SERIAL SETUP

Serial setups set the baud rate and flow control used when download-
ing files to a personal computer or printer.

Baud Rate

 

Baud Rate specifies the RS232C serial port data output rate when
copying files to a personal computer or using an RS232 printer.

Selections are 1200, 2400, 4800, 9600, 19200, or 38400 bps. Factory
default is 19200 bps.

Flow Control

 

Flow Control specifies the RS232C serial port data flow control
when copying files to a personal computer or using an RS232 printer.
If connected to a computer, Flow Control cannot be set to XON/
XOFF.

Selections are None, XON/XOFF, RTS/CTS, or DTR. Factory
default is None.

PRINTER SETUP

Printer setups are setups that affect an external printer.

Printer

 

Printer specifies the type of external printer used to print files.

Selections are Seiko DPU411, Epson, HP DeskJet, HP LaserJet, HP
ThinkJet, and PostScript. Factory default is Seiko DPU411.

Although printers can be connected to the serial port, we recommend
using the parallel port. If using the serial port, see Table 5–4 on page
5–5 for information about serial cables and printer setups.

Setups

1–42

TFS3031 TekRanger/TekRanger 2 User Manual

RS232 SERIAL SETUP

Serial setups set the baud rate and flow control used when download-
ing files to a personal computer or printer.

Baud Rate

 

Baud Rate specifies the RS232C serial port data output rate when
copying files to a personal computer or using an RS232 printer.

Selections are 1200, 2400, 4800, 9600, 19200, or 38400 bps. Factory
default is 19200 bps.

Flow Control

 

Flow Control specifies the RS232C serial port data flow control
when copying files to a personal computer or using an RS232 printer.
If connected to a computer, Flow Control cannot be set to XON/
XOFF.

Selections are None, XON/XOFF, RTS/CTS, or DTR. Factory
default is None.

PRINTER SETUP

Printer setups are setups that affect an external printer.

Printer

 

Printer specifies the type of external printer used to print files.

Selections are Seiko DPU411, Epson, HP DeskJet, HP LaserJet, HP
ThinkJet, and PostScript. Factory default is Seiko DPU411.

Although printers can be connected to the serial port, we recommend
using the parallel port. If using the serial port, see Table 5–4 on page
5–5 for information about serial cables and printer setups.

Summary of Contents for ATEC TekRanger 2















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands