Printing Files
2–46
TFS3031 TekRanger/TekRanger 2 User Manual
Seiko DPU411 Switch #1 – Parallel Cable
Switch #
Function
1
On – Parallel/Serial Interface
2
Off – Carriage Return
3
Off – Condensed Printing
4
On – Ordinary Characters
5
Off – No Zero Font Setting
6, 7, 8
Off, On, On – English
Seiko DPU411 Switch #2 – Parallel Cable
Switch #
Function
1
On – 8 Bits
2
On – No Parity Permission
3
Off – Even Parity Condition
4, 5, 6
Off, Off, Off – 9600 Baud
If using a Seiko DPU411 printer with a serial cable, Switch
#1: 1 (Parallel/Serial Interface) should be set to Off. All
other setups remain as shown in the table.
For other supported printers, use the setups as directed in
each printer’s user manual. When using the serial port,
make sure the printer is set for eight bits and no parity.
Step 2. Connect the printer to the TFS3031 parallel port (or serial
port), using the appropriate interface cable.
See Table 5–10 on page 5–11 for ordering printer cables.
See Table 5–4 on page 5–5 for information about serial
cables.
Step 3. Power on the printer. Make sure the printer powers on
properly.
Printing Files
2–46
TFS3031 TekRanger/TekRanger 2 User Manual
Seiko DPU411 Switch #1 – Parallel Cable
Switch #
Function
1
On – Parallel/Serial Interface
2
Off – Carriage Return
3
Off – Condensed Printing
4
On – Ordinary Characters
5
Off – No Zero Font Setting
6, 7, 8
Off, On, On – English
Seiko DPU411 Switch #2 – Parallel Cable
Switch #
Function
1
On – 8 Bits
2
On – No Parity Permission
3
Off – Even Parity Condition
4, 5, 6
Off, Off, Off – 9600 Baud
If using a Seiko DPU411 printer with a serial cable, Switch
#1: 1 (Parallel/Serial Interface) should be set to Off. All
other setups remain as shown in the table.
For other supported printers, use the setups as directed in
each printer’s user manual. When using the serial port,
make sure the printer is set for eight bits and no parity.
Step 2. Connect the printer to the TFS3031 parallel port (or serial
port), using the appropriate interface cable.
See Table 5–10 on page 5–11 for ordering printer cables.
See Table 5–4 on page 5–5 for information about serial
cables.
Step 3. Power on the printer. Make sure the printer powers on
properly.