Tektronix ATEC TekRanger 2 User Manual Download Page 13

Page: 13 / 174

General Safety Summary

TFS3031 TekRanger/TekRanger 2 User Manual

Safety Terms and Symbols

Terms in This Manual

WARNING.

Warning statements identify conditions or practices that

could result in injury or loss of life.

CAUTION.

Caution statements identify conditions or practices that

could result in damage to this product or other property.

Terms on the Product

DANGER indicates an injury hazard immediately accessible as you
read the marking.

WARNING indicates an injury hazard not immediately accessible as
you read the marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product

DANGER

High Voltage

Protective Ground

(Earth) Terminal

ATTENTION

Refer to

Manual

General Safety Summary

TFS3031 TekRanger/TekRanger 2 User Manual

Safety Terms and Symbols

Terms in This Manual

WARNING.

Warning statements identify conditions or practices that

could result in injury or loss of life.

CAUTION.

Caution statements identify conditions or practices that

could result in damage to this product or other property.

Terms on the Product

DANGER indicates an injury hazard immediately accessible as you
read the marking.

WARNING indicates an injury hazard not immediately accessible as
you read the marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product

DANGER

High Voltage

Protective Ground

(Earth) Terminal

ATTENTION

Refer to

Manual

Summary of Contents for ATEC TekRanger 2















































































































































































Search results

Summary of Contents for ATEC TekRanger 2

Reviews:

Brands by name

Popular brands

Tektronix ATEC TekRanger 2, User Manual

Search results

Summary of Contents for ATEC TekRanger 2

Reviews:

Brands by name

Popular brands