manualshive.com logo in svg

Tektronix ATEC TekRanger 2, User Manual

Share
Download
Tektronix ATEC TekRanger 2 User Manual Download Page 16

Preface

xii

TFS3031 TekRanger/TekRanger 2 User Manual

Before Operating

To prevent injury to yourself or damage to equipment:

H

Read the ‘‘General Safety Summary’’ at the beginning of this
manual.

H

Heed all warnings, cautions, and notes in this manual.

Assumptions

The procedures in this manual assume that you have a working
knowledge of fiber-optic cable test procedures and terminology, and
that you are a qualified operator of fiber-optic cable test equipment.

How to Use this Manual

NOTE

. This manual explains how to use the TFS3031 TekRanger and

TekRanger 2 instruments. The information applies to all instrument
options, both singlemode and multimode, unless otherwise indicated. 

Some earlier versions of TFS3031 software do not include all the
user-interface functions described in this manual. Refer to section 4,
Maintenance, for a list of features that apply to earlier software
versions.

This manual is arranged so that you can use the TFS3031 to
successfully test a fiber after reviewing sections 1 and 2 only.

H

Section 1. Getting Started. Locations and descriptions of ports,
buttons, and softkeys. Instrument setups.

H

Section 2. Testing a Fiber. How to: 1) test a fiber and make fiber
measurements; 2) store test files in internal memory or floppy
disk; 3) print files; and 4) copy files to a personal computer.

H

Section 3. Recharging the NiCad Battery. How to recharge and
replace the NiCad battery, and use the power-charger adapter.

Preface

xii

TFS3031 TekRanger/TekRanger 2 User Manual

Before Operating

To prevent injury to yourself or damage to equipment:

H

Read the ‘‘General Safety Summary’’ at the beginning of this
manual.

H

Heed all warnings, cautions, and notes in this manual.

Assumptions

The procedures in this manual assume that you have a working
knowledge of fiber-optic cable test procedures and terminology, and
that you are a qualified operator of fiber-optic cable test equipment.

How to Use this Manual

NOTE

. This manual explains how to use the TFS3031 TekRanger and

TekRanger 2 instruments. The information applies to all instrument
options, both singlemode and multimode, unless otherwise indicated. 

Some earlier versions of TFS3031 software do not include all the
user-interface functions described in this manual. Refer to section 4,
Maintenance, for a list of features that apply to earlier software
versions.

This manual is arranged so that you can use the TFS3031 to
successfully test a fiber after reviewing sections 1 and 2 only.

H

Section 1. Getting Started. Locations and descriptions of ports,
buttons, and softkeys. Instrument setups.

H

Section 2. Testing a Fiber. How to: 1) test a fiber and make fiber
measurements; 2) store test files in internal memory or floppy
disk; 3) print files; and 4) copy files to a personal computer.

H

Section 3. Recharging the NiCad Battery. How to recharge and
replace the NiCad battery, and use the power-charger adapter.

Summary of Contents for ATEC TekRanger 2















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands