Tektronix ATEC TekRanger 2, User Manual

Page: 38 / 174

Setups
1–18 TFS3031 TekRanger/TekRanger 2 User Manual
H
A setup field in mid screen that lists all the setups in a
menu. The currently selected setup is highlighted.
H
A change bar at bottom screen showing the currently
selected setup parameter and options. An arrow that
indicates more options may show on either end of the
change bar.
NOTE
. The setup screen last exited is the same one entered when you
push the
Setup
softkey.
Step 2. Push the
SELECT
button repeatedly to cycle through the
setup menus (Test, Format, System, I/O–Doc).
SELECT
button options are displayed in the lower right corner of the
screen.
Choose the Test Setup menu to continue with this example.
Step 3. To cycle through the Test setups, push the or arrow
key repeatedly (or hold the key down).
Notice how the setups cycle in the setup field and change
bar.
Choose the Fiber Scan setup to continue. Fiber Scan sets
the test mode of the instrument.
NOTE . In the Test Setup menu, setups enclosed in angle brackets
(< >) are adjusted automatically during the test by the TFS3031 in
order to achieve the best results. These setups are not user selectable.
Step 4. To cycle through the Fiber Scan parameters, push the
or arrow key.
Notice how the parameters cycle in the setup field and
change bar.
Setups
1–18 TFS3031 TekRanger/TekRanger 2 User Manual
H
A setup field in mid screen that lists all the setups in a
menu. The currently selected setup is highlighted.
H
A change bar at bottom screen showing the currently
selected setup parameter and options. An arrow that
indicates more options may show on either end of the
change bar.
NOTE
. The setup screen last exited is the same one entered when you
push the
Setup
softkey.
Step 2. Push the
SELECT
button repeatedly to cycle through the
setup menus (Test, Format, System, I/O–Doc).
SELECT
button options are displayed in the lower right corner of the
screen.
Choose the Test Setup menu to continue with this example.
Step 3. To cycle through the Test setups, push the or arrow
key repeatedly (or hold the key down).
Notice how the setups cycle in the setup field and change
bar.
Choose the Fiber Scan setup to continue. Fiber Scan sets
the test mode of the instrument.
NOTE . In the Test Setup menu, setups enclosed in angle brackets
(< >) are adjusted automatically during the test by the TFS3031 in
order to achieve the best results. These setups are not user selectable.
Step 4. To cycle through the Fiber Scan parameters, push the
or arrow key.
Notice how the parameters cycle in the setup field and
change bar.