manualshive.com logo in svg

Tektronix ATEC TekRanger 2, User Manual

Share
Download
Tektronix ATEC TekRanger 2 User Manual Download Page 22

Port Functions

1–2

TFS3031 TekRanger/TekRanger 2 User Manual

CAUTION.

 Do not fire the laser (push the 

START/STOP

 button)

unless a fiber is connected to the laser output port. Severe damage to
internal electronics can result.

Connector Adapter

The connector adapter attaches the fiber to the laser output port.
Connector adapters are packaged separately with new instruments,
and must be installed on the laser output port before use.

The connector adapter on the TFS3031 must match the connector on
the test fiber. See page 5–13 for a list of connector adapter options.

Connector Adapter Installation and Removal

Connector adapters are keyed for proper mating with the laser output
port.

To install a connector adapter, align the keyed elements, slide the
connector adapter onto the laser output port, and turn clockwise until
the connector adapter is finger tight (see Figure 1–1).

To remove a connector adapter, unscrew it counterclockwise and pull
it straight off the port.

Connector
adapter

Figure 1–1: Connector Adapter Installation

Port Functions

1–2

TFS3031 TekRanger/TekRanger 2 User Manual

CAUTION.

 Do not fire the laser (push the 

START/STOP

 button)

unless a fiber is connected to the laser output port. Severe damage to
internal electronics can result.

Connector Adapter

The connector adapter attaches the fiber to the laser output port.
Connector adapters are packaged separately with new instruments,
and must be installed on the laser output port before use.

The connector adapter on the TFS3031 must match the connector on
the test fiber. See page 5–13 for a list of connector adapter options.

Connector Adapter Installation and Removal

Connector adapters are keyed for proper mating with the laser output
port.

To install a connector adapter, align the keyed elements, slide the
connector adapter onto the laser output port, and turn clockwise until
the connector adapter is finger tight (see Figure 1–1).

To remove a connector adapter, unscrew it counterclockwise and pull
it straight off the port.

Connector
adapter

Figure 1–1: Connector Adapter Installation

Summary of Contents for ATEC TekRanger 2















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands