manualshive.com logo in svg

Tektronix ATEC TekRanger 2, User Manual

Share
Download
Tektronix ATEC TekRanger 2 User Manual Download Page 136

Cleaning

4–4

TFS3031 TekRanger/TekRanger 2 User Manual

Cleaning the Connector Adapter

Step 1. Blow through each end of the connector adapter barrel with

dust-free canned air (see Figure 4–3).

Step 2. Dampen a lint-free pipe cleaner with electronics-grade

alcohol. The pipe cleaner absorbent should be about 0.35
cm (0.15 inch) in diameter, and the wire part of the pipe
cleaner should be less than 0.1 cm (0.04 inch) in diameter.

Step 3. Gently insert the dampened pipe cleaner into the barrel of

the connector adapter. Be careful not to scratch the barrel
with the wire while inserting it.

Step 4. Pull the pipe cleaner completely through the barrel.

Step 5. Blow the barrel completely dry with dust-free canned air.

If the connector adapter is extremely dirty repeat the procedure with
a second pipe cleaner.

Pipe cleaner

Connector adapter

Canned Air

Figure 4–3: Cleaning the Connector Adapter

Cleaning

4–4

TFS3031 TekRanger/TekRanger 2 User Manual

Cleaning the Connector Adapter

Step 1. Blow through each end of the connector adapter barrel with

dust-free canned air (see Figure 4–3).

Step 2. Dampen a lint-free pipe cleaner with electronics-grade

alcohol. The pipe cleaner absorbent should be about 0.35
cm (0.15 inch) in diameter, and the wire part of the pipe
cleaner should be less than 0.1 cm (0.04 inch) in diameter.

Step 3. Gently insert the dampened pipe cleaner into the barrel of

the connector adapter. Be careful not to scratch the barrel
with the wire while inserting it.

Step 4. Pull the pipe cleaner completely through the barrel.

Step 5. Blow the barrel completely dry with dust-free canned air.

If the connector adapter is extremely dirty repeat the procedure with
a second pipe cleaner.

Pipe cleaner

Connector adapter

Canned Air

Figure 4–3: Cleaning the Connector Adapter

Summary of Contents for ATEC TekRanger 2















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands