manualshive.com logo in svg

Tektronix ATEC TekRanger 2, User Manual

Share
Download
Tektronix ATEC TekRanger 2 User Manual Download Page 115

Printing Files

TFS3031 TekRanger/TekRanger 2 User Manual

2–47

Step 4. Power on the TFS3031. If necessary, complete a new test.

Step 5. Push the 

Store or Print

 softkey.

Step 6. Push the 

SELECT

 button to select the Print option.

Step 7. Push the 

Internal/Floppy

 softkey to select the memory

source of the file to be printed, then use the arrow keys to
select the file for printing.

To print a newly completed test that is not in memory,
select the Current Acquisition file at the top of the screen.

Step 8. The first four fiber notes for the current file are displayed on

the Print screen.

If the current acquisition is selected, you can enter and edit
fiber notes for the current acquisition before printing, by
pressing the 

Edit Notes

 softkey. Refer to page 2–33 for

instructions on adding and editing fiber notes.

If a file on floppy disk or in internal memory is selected, the

Edit Notes

 softkey is replaced by the 

View Notes

 softkey.

Press the 

View Notes

 softkey to display all fiber notes for

the selected file.

Step 9. Configure the TFS3031 for the printer in use.

Push the 

Printer Setup

 softkey. Use the arrow keys to

select and change these setups:

H

Printer

Select type of printer being used. Seiko DPU411 is the
default.

H

Print Content

When printing the Current Acquisition (current test), the
Print Content setup determines printer output.

When printing a single file from storage, what gets
printed depends on the Print Content setup, and file

Printing Files

TFS3031 TekRanger/TekRanger 2 User Manual

2–47

Step 4. Power on the TFS3031. If necessary, complete a new test.

Step 5. Push the 

Store or Print

 softkey.

Step 6. Push the 

SELECT

 button to select the Print option.

Step 7. Push the 

Internal/Floppy

 softkey to select the memory

source of the file to be printed, then use the arrow keys to
select the file for printing.

To print a newly completed test that is not in memory,
select the Current Acquisition file at the top of the screen.

Step 8. The first four fiber notes for the current file are displayed on

the Print screen.

If the current acquisition is selected, you can enter and edit
fiber notes for the current acquisition before printing, by
pressing the 

Edit Notes

 softkey. Refer to page 2–33 for

instructions on adding and editing fiber notes.

If a file on floppy disk or in internal memory is selected, the

Edit Notes

 softkey is replaced by the 

View Notes

 softkey.

Press the 

View Notes

 softkey to display all fiber notes for

the selected file.

Step 9. Configure the TFS3031 for the printer in use.

Push the 

Printer Setup

 softkey. Use the arrow keys to

select and change these setups:

H

Printer

Select type of printer being used. Seiko DPU411 is the
default.

H

Print Content

When printing the Current Acquisition (current test), the
Print Content setup determines printer output.

When printing a single file from storage, what gets
printed depends on the Print Content setup, and file

Summary of Contents for ATEC TekRanger 2















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands