manualshive.com logo in svg

Tektronix 2246 1Y, Service Manual

The Tektronix 2246 1Y is a high-performance oscilloscope that delivers accurate measurements for professionals. For any troubleshooting or maintenance needs, the detailed Service Manual is available for free download at manualshive.com. This manual provides comprehensive instructions and technical insights to maximize the potential of this excellent product.

Share
Download
background image

Theory  of  Operation—2246  1Y  and  2246  Mod  A  Service

B  TV  TRIG  EN: 

Switches  between  the  B  TV  Trigger 

signal  and  the  DC  measurement  signal  voltage 

(U1106C).

TV  FIELD  SEL: 

Switches  the  A  Trigger  between  TV 

FIELD  and  TV  LINE  (U1104A).

MAG: 

Controls  the  X I 0  Magnification  function  of  the 

Horizontal  Output  Preamplifier  (U802,  Diagram  6).

VERT  COMP  EN 

:  Turns on  the  Vertical  Comparator 

(U702, 

Diagram 

2) 

during 

voltage 

self 

characterization.

TB  CAL: 

Switches  the  tim e-base  calibration  signal 

into  the  B  trigger  system  during  horizontal  self 
characterization  (U1106A ).

BW 

FULL  B: 

Switches  between  full  and  limited  B 

Trigger  bandwidth.

BW  LIMIT :  Switches  between  full  and  limited  A Trig­
ger  bandwidth.  The  BW  LIMIT  signal  has  a  second 
use.  As  the  last  bit  in  Shift  Register  1,  it  is  fed  back 

to  the  Measurement  Processor  during  diagnostic 
checks  done  on  the  Shift  Registers.

X  Y  :  Switches  the  range  of  the  horizontal  position 
signal  (HORIZ  POS)  between  that  needed  for  Y-T 
display  and  that  needed  for  X -Y   display  (U301B, 
Diagram  6).

Multiplexer  (U1106A)  normally  provides  the  Line 

Trigger  signal  picked  off  from  the  Power  Supply 

input.  For  self  characterization  (SELF  CAL)  of  the 

Time  Base,  the  switch  outputs  the  TB  CAL  signal 
obtained  from  the  Measurement  Processor  (U2501, 

Diagram  8).

TV  Trigger  Detector

INPUT  AMPLIFIER. 

The  signal  at  pin  19  of  U421A  is 

applied  to  pin  3  of  U1101A  via  a  low-pass  filter 
formed  by  R426,  L426,  and  C426.  The  filter  limits 

the  bandwidth  of  the  X-AXIS  signal  to  about  5  MHz 
for  application  to  the  Horizontal  Preamplifier  (U802, 

Diagram  6)  and  to  the  TV  Trigger  Detector  circuitry. 
Operational  amplifier  U1101A  provides  low-pass 
gain  of  the  applied  composite  video  signal  that 

further  attenuates  the  video  portion  of  the  signal 

relative  to  the  sync  pulses.  The  output  signal  from 
U1101A  is  applied  to  the  Peak  Detectors  and  the 

Sync  Comparator.

PEAK  DETECTORS. 

The  peak  detectors  determine 

the  positive  and  negative  peaks  of  the  applied  com ­
posite  video  signal.  Those  peaks  voltages  are 
applied  across  a  voltage  divider  circuit  used  to  set 

the  comparison  level  (slice  level)  to  one  input  of  a 

comparator.  That  level  is  such  that,  when  the  user

selects  the  correct  sync  polarity  for  the  applied  sig­
nal,  the  middle  of  the  sync  tips  is  at  the  threshold 
level  of  the  comparator.  The  output  of  the  com­

parator  then  switches  only  on  the  sync  tips  of  the 
applied  signal.  The  peak  detectors  are  comple­
mentary  in  that  the  positive-peak  detector  tran­
sistors  (Q1101,  Q1102, 

and  Q1103) 

and  the 

negative-peak  detector  transistors  (Q1104,  Q1105, 
and  Q1106)  are  complem entary  types  (PNP-NPN). 
Both  detectors  are  driven  from  the  same  input 
signal;  the  positive  peaks  of  the  video  signal  forward 
bias  Q1101,  and  the  negative  peaks  forward  bias 
Q1104.  The  operation  of  the  positive  peak  detector 
is  described.

The  composite  video  signal  is  applied  to  the  emitter 
of  Q1101.  A  positive-going  signal  increases  the 

current through  Q1101,  causing  the  collector voltage 

to  rise.  The  rising  collector  voltage  biases  on  Q1102 

harder,  and  C l 114  charges  up  rapidly  following  the 
positive-going  signal  up  to  its  positive  peak.  When 

the  input  signal  starts  negative,  Q1101  is  turned  off 
immediately  by  the  charge  held  on  C l 114.  That 

leaves  C l 114  holding  the  positive  peak  voltage  of 

the  input  signal.  Em itter-follower  Q1103  applies  that 
peak voltage  level to  U1104B  pin  3  via  R1117.  R1136 
to the -7 .5  V from   pin  3  provides  a fixed  offset to the 
signal  level.  The  negative-peak  detector  does  the 
same  type  of  operation  on  the  signal  to  apply  the 
negative  peak  voltage  to  pin  5  of  U1104B.

When the sync  polarity  is  selected  to  match  the sync 

of  the  applied  video  signal  (by  the  user  with  the  A 
SLOPE  switch),  the  voltage  level  at  the  selected 
input  of  U1104B  is  at  the  middle  of  the  sync-tip 

voltage.  If  the  wrong  polarity  is  selected,  triggering 
will  take  place  on  the  video  signal.  For  signal 

generator  signals,  the  effect  may  not  be  noticeable, 
except  for  a  shift  of  the  trigger  point;  but  if  com ­
posite  video  signals  are  being  viewed,  the  display 

will  be  unstable when  the  wrong  polarity  is  selected.

SYNC  COMPARATOR. 

The  incoming  composite 

video  signal  is  applied  to the  plus  input  (pin  3)  of the 
Video  Sync  Comparator  (U1102A).  The  Video  Sync 
Comparator  looks  at  the  signal  level  on  pin  2  and 
compares  it  with  the  incoming  video  signal  level. 
When  the  incoming  level  crosses  the  comparison 
threshold,  the  output  of  U1102A switches  state.  That 
state  change  occurs  at  the  mid  level  of  the  sync 
pulses.  The  output  signal  of  U1102A  (TV  LINE)  is 
applied  directly to  U1104A  pin  2  and  U11Q6C  pin  1  to 
be  available  for  selection  for  the  A  and  the  B Trigger 
systems  for  TV  LINE  triggering.

FIELD  SYNC  FILTER. 

The  filter  circuit  composed  of 

R1132, 

R1133, 

C l 106, 

C1107, 

and 

U1102B

processes 

the 

output 

of 

U1102A  further  to 

determine  when  the  vertical  field  sync  signal  is 
present.  The  time  constant  of  the  filter  elements  is 
such  that the  line  sync  pulses  between  vertical  fields

3-15

Summary of Contents for 2246 1Y


















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2246 1Y

Tanco A Series Operator'S Handbook Manual preview
A Series
Brand: Tanco Pages: 72
HABYS Aero Instruction Manual & Warranty preview
Aero
Brand: HABYS Pages: 16
Acterna A Series Operating Manual preview
A Series
Brand: Acterna Pages: 72
Ecco 200 Series Installation & Operating Instructions preview
200 Series
Brand: Ecco Pages: 4
JD Squared 3 Assembly & Operating Instructions preview
3
Brand: JD Squared Pages: 15
DAPAudio D1256 Manual preview
D1256
Brand: DAPAudio Pages: 16
3M 400 Series User Instructions preview
400 Series
Brand: 3M Pages: 28
Jacobsen 600 Series Mounting Instructions preview
600 Series
Brand: Jacobsen Pages: 6
MacDon M155 Unloading And Assembly Instructions preview
M155
Brand: MacDon Pages: 272
MacDon M155 Installation Instructions Manual preview
M155
Brand: MacDon Pages: 70
Panasonic LP-M Series Maintenance Manual preview
LP-M Series
Brand: Panasonic Pages: 174
idiag P100 Quick Reference Manual preview
P100
Brand: idiag Pages: 12
Quincy lab GC Series Operating Manual preview
GC Series
Brand: Quincy lab Pages: 4
DB Industries DELTA 2 User Instructions preview
DELTA 2
Brand: DB Industries Pages: 60
vc999 K5 Operating Manual preview
K5
Brand: vc999 Pages: 55
Salsbury Industries 3700 Series Manual preview
3700 Series
Brand: Salsbury Industries Pages: 4
Bartscher B5000 Manual preview
B5000
Brand: Bartscher Pages: 20
Bartscher 6640 Original Instruction Manual preview
6640
Brand: Bartscher Pages: 24

Brands by name

Popular brands

Load more brands