manualshive.com logo in svg

Tektronix 2246 1Y, Service Manual

The Tektronix 2246 1Y is a high-performance oscilloscope that delivers accurate measurements for professionals. For any troubleshooting or maintenance needs, the detailed Service Manual is available for free download at manualshive.com. This manual provides comprehensive instructions and technical insights to maximize the potential of this excellent product.

Share
Download
background image

M aintenance—2246  1Y  and  2246  Mod  A  Service

2.  ROM  diagnostics—failures  indicated  by  flashing 

AUTO  lamp.  Tests  all  of  ROM,  except  for  ROM 

header.  Runs  proprietary  version  of  CROC  test.

3.  Readout  interface  diagnostics—failures  indicated 

by  flashing  NORM  lamp.  Performs  a  m arching- 
one  test  around  the  loop  from  D7-D0  to  R7-R0 
and  back.

SERVICE  MODE

The  service  mode  driver  menu  is  accessed  by 
pressing  the  top  and  the  bottom  m enu-item   buttons 
at  the  same  time.  The  initial  SERVICE  MENU  will  be 
displayed  as  shown  in  Figure  6-2.  Each  service 
menu  display has  two  parts;  the  part to  the  left  is  the 
service  menu,  and  the  part  to  the  right  is  the 

modifier  menu.

the  left  side  of  the  screen  with  the  name  of  the 
selected  sub-m enu  displayed  in  the  top  line.

A  menu  choice  that  has  no  following  slash  is  an 
executable  service  routine.  The  routine  may  be  run 
by  underlining  it  and  pressing  the  menu  button  next 
to  the  RUN  label  that  appears  in  the  modifier  menu 
list.  Executable  servicing  selections  are:  diagnostics 
that  return  either  a  pass  message  or  a  fail  message 
along  with  service  data;  one-shot  exercisers  that 
carry  out  some  service  and  immediately  return  to 
the  menu;  or  regular  exercisers  that  carry  out  a 
service  while  continuously  displaying  service  data.

An  underlined  service-m enu  choice  is  available  for 
selection.  To  select  a  menu  item,  use  the  buttons 

next  to  the  up-arrow   and  down-arrow  symbols  to 
move  the  underline  up  or  down  in  the  SERVICE 
MENU.  When  the  underline  is  below  the  sub-menu 

title,  pressing  the  menu  button  next  to  up-arrow 

MENU  label  returns  to  the  preceding  menu  con­
taining  that  sub-m enu  (an  up-m enu  operation).

SERVICE  MENU/

DIAGNOSE 

t  MENU

CONFIGURE 

4,

SELF  CAL  MEASUREMENTS 

INTERNAL  SETTINGS  MENU/ 

EXERCISER  MENU/ 

QUIT

6555-23

Figure  6-2.  Initial  SERVICE  MENU.

Each  service  menu  has  a  title  and  a  number  of 
selectable  items  in  the  menu.  The  title  appears  in 

the  top  line  of  the  crt  display,  and  the  selectable 

items  appear  under  the  title, 

indented 

(see 

Figure  6 -2 ).  Menu  choices  that  are  names  of  sub­
menus  have  a  following  slash  (/),  and  when  one  is 
underlined,  the  word  “ SELECT”  appears  in  the 
modifier  menu  list.  When  a  choice  with  sub-menus 

i s   s e l e c t e d ,   t h e   s u b - m e n u   c h o i c e s  

are  displayed  on

Pressing  the  QUIT  selection  or CLEAR  Display  button 

at  any  time  the  choice  is  displayed  will  cause  the 
scope  to  return  to  normal  oscilloscope  mode.  If  a 
service  routine  is  operating  that  has  an  END  menu 
selection  displayed,  pressing  the  button  next  to  END 
exits  the  routine  and  returns  to  the  selection  menu 

(where  QUIT  is  displayed).  Routines  that  run  once, 

return  to  the  selection  menu  when  finished.

The  diagnostic  tests  in  the  SERVICE  MENU  may  be 

run  with  a  conditional  setting  that  determines  how 
many  times  the  routine  is  done.  The  conditional 
MODE  setting  menu  choice  appears  in  the  modifier 
menu  when  the  DIAGNOSE  choice  in  the  SERVICE 
MENU  is  underlined  (see  Figure  6 -3 ).  One  of  the  fol­
lowing  mode  types  will  be  displayed:

ONCE,  CONTINUOUS,  UNTIL  PASS,  or  UNTIL  FAIL

Change  the  mode  type  displayed  in  the  bottom  line 
by  pressing  the  MODE  button.  When  ONCE  is  the 
mode,  the  diagnostic  is  run  once,  and  the  result  is 
displayed.  When  CONTINUOUS  is  the  mode,  the 
diagnostics  are  run  continuously.  When  UNTIL  PASS 
is  the  mode,  the  diagnostics  are  run  until  they  pass. 

When  UNTIL  FAIL  is  the  mode,  the  diagnostics  are 
run  until  they fail.  In  order to  stop  a  diagnostic  that  is 
looping  in  the  CONTINUOUS,  UNTIL  PASS,  or  UNTIL 
FAIL  mode,  press  the  HALT  button.  The  diagnostic 
will  stop  and  display  the  current  status.  When  the 
status  is  displayed,  press  END  to  return  to  the 
SERVICE  MENU  choices.

6-11

Summary of Contents for 2246 1Y


















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2246 1Y

BANLAW 800 Series Product Data Sheet preview
800 Series
Brand: BANLAW Pages: 32
Baker Instrument Company D6000 Digital Troubleshooting Procedures & Fault Listing preview
D6000
Brand: Baker Instrument Company Pages: 24
GE b30 User'S Reference Manual preview
b30
Brand: GE Pages: 242
GE ATS1290 Instruction Manual preview
ATS1290
Brand: GE Pages: 24
Balanced Body Allegro How To Assemble preview
Allegro
Brand: Balanced Body Pages: 3
Labnet D1200 Instruction Manual preview
D1200
Brand: Labnet Pages: 2
Harken T2 Instructions preview
T2
Brand: Harken Pages: 4
Baroness TDA1200 Owner'S Operating Manual preview
TDA1200
Brand: Baroness Pages: 40
Baroness SP05 Owner'S Operating Manual preview
SP05
Brand: Baroness Pages: 40
BARKO LOADERS 295 Service Manual preview
295
Brand: BARKO LOADERS Pages: 85
Eaton PowerXL DX-NET-ETHERNET2-2 User Manual preview
PowerXL DX-NET-ETHERNET2-2
Brand: Eaton Pages: 48
Eaton Power Xpert C445 Manual preview
Power Xpert C445
Brand: Eaton Pages: 2
Haag-Streit BQ 900 Instructions For Use Manual preview
BQ 900
Brand: Haag-Streit Pages: 18
Haag-Streit IM 900 Instruction Manual preview
IM 900
Brand: Haag-Streit Pages: 20
V-TEK PT-55 Quick Start Manual preview
PT-55
Brand: V-TEK Pages: 2
V-TEK PT-55 User Manual preview
PT-55
Brand: V-TEK Pages: 112
IDEAL Networks LanTEK IV User Manua preview
LanTEK IV
Brand: IDEAL Networks Pages: 60
IceCure IceSense3 User Manual preview
IceSense3
Brand: IceCure Pages: 104

Brands by name

Popular brands

Load more brands