manualshive.com logo in svg

Tektronix 2246 1Y, Service Manual

The Tektronix 2246 1Y is a high-performance oscilloscope that delivers accurate measurements for professionals. For any troubleshooting or maintenance needs, the detailed Service Manual is available for free download at manualshive.com. This manual provides comprehensive instructions and technical insights to maximize the potential of this excellent product.

Share
Download
background image

Maintenance—2246  1Y  and  2246  Mod  A  Service

2.  Check  Readout  Request  pulse  (RO  REQ,  U2410 

pin  14).

3.  Check  Readout  Blanking  signal  ( RO  BLANK, 

U2410  pin  16).

4.  Check  activity  of  Readout  Processor  (U2400).

5.  Check 

outputs of 

Vertical 

and  Horizontal

Readout 

DACs 

(U2412 

and 

U2413, 

respectively).

6.  Check 

outputs of 

Vertical 

and  Horizontal

Readout  Mixers 

(U2416A  and  U2416B,  re­

spectively)  and  multiplexers  (U2414  and  U2415, 
respectively).

Schematic  Diagram  10—SWITCH  BOARD  AND

 

INTERFACE

1.  Run  the  EXERCISE  SWITCHES  exerciser  and 

check  each  of  the  front  panel  switches  for  cor­
rect  operation.  The  circuit  number  of  the  latest 
switch  pressed  is  displayed  in  the  readout. 
Pressing  END  exits  the  exerciser;  pressing 
CLEAR 

MEAS’ MT 

terminates 

the 

Service 

Program.

2.  Run  the  EXERCISE  LEDS  exerciser  and  check 

that  each  of  the  front  panel  LEDS  may  be  turned 
on.  The  circuit  number  of  the  lighted  LED  is  dis­
played  in  the  readout.  Circuit  numbers  DS2016, 

DS2017 ,'  DS2018,  DS2019,  DS2024,  DS2040, 
and  DS2049  do  not  correspond  to  any  LEDs  on 

the  front 

panel. 

Pressing 

END 

exits  the 

excerciser.

Schematic  Diagram  11—ADC,  DAC  SYSTEM

1.  Run  EXERCISE  DACS  (under  EXERCISER,  PROC 

BOARD,  and  A  TO  D  menus)  and  probe  the 
demultiplexed  outputs  of  U2303  (Diagram  11) 
and  each  of  the  sam ple-and-hold  circuits  for 
proper  operation.

2.  Run  EXERCISE  PORTS  (under  EXERCISER,  PROC 

BOARD,  and  A TO  D  menus)  and  trace  the  signal 
path 

of 

any 

problems 

with 

the 

A -to -D  

Converter.

Schematic  Diagram  12-POW ER  SUPPLY

W A R N IN G   I

For  safety  reasons,  an  isolation  transformer

 

must be  connected  whenever  troubleshooting

 

is  done in  the  Preregulator and Inverter Power

 

Supply  sections  of  the  instrument.

1.  If  the  fuse  blows,  check  that  Q2201  is  not 

shorted.  (If  a  variac  is  available,  slowly  increase 

the  line  voltage  from  0  V  until  the  voltage  across 
C2202  is  about  40  V.  If  the  same  voltage  is 
across  C2203,  Q2201  is  probably  shorted.)

2.  If  the  Preregulator  fails  to  come  up  (44  V  not 

present  across  C2203):

a.  Check  +DC  at  the  output  of  the  line  rectifier 

bridge  (across  C2202)  for  approximately 

( VacRMS  X  1.414).

b.  Check  the  Start-up  circuit.  The  voltage 

across  C2204  should  ramp  up  to  about  20 V, 
at  which  point  Q2204  and  Q2211  turn  on  to 
supply  voltage  to  pin  10  of  U2201.

c.  Check  the  Preregulator  circuit.  Voltage 

pulses  with  a  repetition  rate  of  about  25  >xs 
should  be  present  on  pin  8  of  U2201  when­
ever  supply  voltage  is  present  on  pin  10.

3.  If  the  power  supply  is  in  the  chirp  mode  (con­

tinually  restarting  and  shutting  down),  excessive 
loading  of  the  +44  V  supply  is  probable.

TROUBLESHOOTING  MEASUREMENT

 

ERRORS

When  certain  measurement  malfunctions  occur,  the 

symptoms  usually  indicate  the  circuit  components 
that  may  be  causing  the  problems.  Read  the 
following  text to  become familiar with the terms  used 
in  describing  a  measurement  failure  problem  and 
the  setup  conditions  needed  to  determine  the 
symptoms.  Then  use  Table  6-9  to  check  for 
measurement  malfunction  symptoms  and  probable 
causes.

1.  Verify  all  the  following  conditions  and  read  the 

definitions  before  attempting  to  use  Table  6-9 
for  locating  the  source  of  m easurem ent-error 
problems.

6-25

Summary of Contents for 2246 1Y


















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2246 1Y

idi MDS Installation & Operator'S Manual preview
MDS
Brand: idi Pages: 20
G&G FPX Series Installation Manual preview
FPX Series
Brand: G&G Pages: 2
H&S 5226 Operator'S Manual preview
5226
Brand: H&S Pages: 46
Garmin GSD20 Sounder Installation Manual preview
GSD20 Sounder
Brand: Garmin Pages: 12
Garmin GC 12 Installation Instructions Manual preview
GC 12
Brand: Garmin Pages: 13
Hacker PROGBOX Manual preview
PROGBOX
Brand: Hacker Pages: 2
J.P. SELECTA SE-100 Manual preview
SE-100
Brand: J.P. SELECTA Pages: 8
Haemonetics PCS 2 Manual preview
PCS 2
Brand: Haemonetics Pages: 134
Hadeco Smartdop 30EX Operation Manual preview
Smartdop 30EX
Brand: Hadeco Pages: 72
laerdal MegaCode Kelly Manual preview
MegaCode Kelly
Brand: laerdal Pages: 8
LAHTI PRO 46018 User Manual preview
46018
Brand: LAHTI PRO Pages: 16
laerdal LSU Directions For Use Manual preview
LSU
Brand: laerdal Pages: 32
laerdal Resusci Anne Important Product Information preview
Resusci Anne
Brand: laerdal Pages: 32
laerdal ALS Simulator Manual preview
ALS Simulator
Brand: laerdal Pages: 8
Coba COBAelite ESD Installation Manuallines preview
COBAelite ESD
Brand: Coba Pages: 2
V&P Scientific SpinVessel VP 418SV3-1-850RB-CC Operating Instructions Manual preview
SpinVessel VP 418SV3-1-850RB-CC
Brand: V&P Scientific Pages: 9
CORN MACDON C HARVESTEC 6000 Installation Manual preview
MACDON C HARVESTEC 6000
Brand: CORN Pages: 24
FUNKY MONKEY BARS THE MANDRILL Assembly Instructions Manual preview
THE MANDRILL
Brand: FUNKY MONKEY BARS Pages: 44

Brands by name

Popular brands

Load more brands