TD-1/07-008
77 / 83
9. KEYPAD INSTRUCTION
9.1. LED KEYPAD
– VPC108
9.1.1 Features
o
Zone number : 8
o
Partition number : 4
o
Programmable backlight
o
Programmable chime
o
Partial Arm / Disarm
o
Lights to display Reports(
Power, Program, Bypass, Memory, Ready, Armed, Trouble, Fire
).
o
Lights that displays zone and partition status
o
All numbers can be displayed by leds
o
Test
,
Bypass
,
Report
,
Memory
,
Chime, Program
buttons ease usage
o
Panic, Fire, Duress
buttons provides easily going into alarm
o
Tamper protection without additional cable
o
Keypad blocking system for 1 minute when password is entered wrongly 5 times
9.1.2. Usage
VPC108 provides arming and programming panel by using buttons and lights. When you push buttons long ,
second function of that button is activated. If you changes values correctly, two short beep is heard. If value
couldn’t be changed , long beep is heard.
In programming mode when you enter 4 digit address data, you can see and change value of that address.
Press X(Exit) button
to exit programming mode. After changing value, enter “√” button to confirm new value.
Zone lights displays number of digits that is entered while entering number or displays options in single-
choice or multi-choice selection.
In Installer Program;
Ready light that is flashing means that keypad is waiting you to enter address,
Armed light that is flashing means that keypad is waiting you to enter value and Trouble and Fire lights that
lights together with Armed light identifies the type of value that user will enter.
