TD-1/07-008
18 / 83
5.2. ENTERING / EXITING INSTALLER & MASTER PROGRAM
Press
Program
button until you hear long beep and enter
installer code then device enters “Installer
Program”. Program led lights and
Ready
light flashes in LED Keypad. LCD Keypad displays “INSTALLER
MENU”.
4 (Program)(long) 9 9 9 9 Default Installer Code = 9999
Press
Program
button unti
l you hear long beep and enter master code then device enters “Installer
Program”. Program and
Ready
light flashes in LED Keypad. LCD Keypad displays “MASTER MENU”.
4 (Program)(long) 1 2 3 4 Default Master Code = 1234
To exit programming mode, press
Exit
button long until you hear long beep then
Program
light becomes
OFF and LCD screen returns stand by mode.
X (Exit) (long)
P
anel exits Programming mode if you don’t press any button within 3 minutes.
5.3. CHANGING CODES
User can simply change codes(except Duress code and PC connection code) by entering following in
Standby mode.
√ (Password) (long) XXXX YYYY YYYY √
XXXX = old code, YYYY = new code
5.4. ASSIGNING / DISPLAYING KEYPAD ADDRESS
Default Keypad Address is
“1”
. If more than one keypad will be used, Keypad addresses must be different
each other. Do following to change Keypad address ;
4 (long) Address
√ (Address = 1, 2, 3, 4 )
Do following to see Keypad address ;
6 (long) 4
Keypad displays its address by zone lights on LED Keypad. LCD Keypad displays its address on screen.
5.5. PROGRAMMING ADDRESSES
ADDRESS
FUNCTION
VALUE
DEFAULT
VALUE
ENTERED
VALUE
PAGE &
PROGRAM
IP:Installer
MP:Master
01 01
Time
HH MM HH=hour , MM= minute
00:00
38
IP, MP
01 02
Date
DD MM YY DD=day, MM=month, YY=year(last 2 digit)
00.00.00
38
IP, MP
01 03
Day of Week
D , D=1~7, 1=Monday.......,7=Sunday,(only readable)
---
39
IP, MP
02 01
02 02
02 03
02 04
Entry Delays
A Partition
B Partition
C Partition
D Partition
0~255 seconds
15
0
0
0
39
,
IP
Look at pg.
34 for SPT
03 01
03 02
03 03
03 04
Exit Delay
A Partition
B Partition
C Partition
D Partition
0~255 seconds
15
0
0
0
39
IP
