TD-1/07-008
35 / 83
7.7. ADDING REMOTE CONTROL MODULE
Remote control module can be added to VAP404 panel. Do following steps to add VAR-144 Remote Control
Module ;
o
Screw module to screw holes in panel case.
o
Connect module to panel by connector supplied with module.
o
Antenna is mounted proper place.
o
RF remote control module is activated from Installer program
60 01 = 1
o
Panic alarm is selected as with sound or silent
60 01 = 2
o
Remote controller is detected by module
Please read VAR-144 Remote Control Module Guide for details.
7.8. ADDING VOICE MESSAGE MODULE
If voice message module is connected to VAP404 panel, panel reads voice message that user recorded. Do
following steps to add Voice Message Module ;
o
Screw module to screw holes in panel case.
o
Connect module to panel by connector that supplied with module.
o
Record message(only in VAV210).
Please read VAV210 Voice Recording Module Guide for details.
7.9. CONNECTION OF VAPMAN SOFTWARE PC VIA COM PORT
o
Connect the VPL-232 PC Link Module to 4 pin connector (J4) of the panel.
o
Connect RS-232 cable to the module and PC
o
Connect 4 pin connection cable to the module and panel.
Please read VPL-232 PC Link Module Guide and VAPMan Software Guide for details.
7.10. CONNECTION OF VAPMAN SOFTWARE PC VIA USB PORT
o
Connect the VPL-USB PC Link Module to 4 pin connector (J4) of the panel.
o
Connect USB cable to the module and PC
o
Connect 4 pin connection cables to the module and panel.
Please read VPL-USB PC Link Module Guide and VAPMan Software Guide for details.
8. DETAILED PROGRAMMING
Usage of this book is explained in following.
4
Press “4”
4 (Program) (long)
Press “4” until you hear long beep.
HH MM
HH= hour MM= minute . Enter time of day.
To enter 12:59 , press 1 2 5 9 in order.
2 (ON) 3 (OFF) Select 2. option and unselect 3. option
While explaining settings, firstly address of settings and its programming mode is displayed then how you
made that setting in LED and LCD Keypad.
