Teknim VAP404, Installation & Operation Manuals

Page: 40 / 83

TD-1/07-008
40 / 83
o
3RD User Phone Number
Address= 06 03 < IP, MP >
Default Value : ---
o
4TH User Phone Number
Address 06 04 < IP, MP >
Default Value : ---
------------
o
6TH User Phone Number
Address= 06 06 < IP, MP >
Default Value : ---
8.1.7. Assigning & Changing User Codes
User codes can be assigned/changed in Master Program. When entered users code, that user becomes
enabled. If “0000” is entered as user code, that user becomes disabled.
o
User Code-1
Address = 07 01 < MP >
To change value :
LED 07 01 YYYY
√
LCD 0-BASIC SETTINGS
→
USER CODES
→
01-USER CODE
YYYY √
YYYY = User Code between 0001 and 9999 (0000 means that user becomes disabled).
Default Value : 0000= Disabled
Example : To assign user code-1 as 2345 do
“ 07 01
2345
√ “
o
User Code-2
Address = 07 02 < MP >
Default Value : 0000=Disabled
o
User Code-3
Address = 07 03 < MP >
Default Value : 0000=Disabled
o
User Code-4

5
Address = 07 04

05 < MP >
Default Value : 0000=Disabled
o
Guest Code
Address = 07 06 < MP >
Default Value : 0000=Disabled
o
Duress Code
Address = 07 07 . < MP >
Default Value : 0000=Disabled
Note: Duress Code is not valid if communicator(Central Monitoring Station calling) and dialer (user calling) is
disabled or if there is no phone line connected panel.
o
PC Connection Code
Address = 07 08 . < MP >
Default Value : 7777
User can simply change codes(includes Installer and Master codes) by entering following in Standby mode.
√ (Password) (long) XXXX YYYY YYYY √
XXXX = old code, YYYY = new code
Note: Duress code and PC connection code can only be assigned/changed in master program.