4-104
Refer to the multi-function digital input and parameters in the following figure 4.3.16
S1
S2
S3
S4
S5
S6
Related Parameters
03-00
24VG
03-01
03-02
03-03
03-04
03-05
Figure 4.3.16 Multi-function digital input and related parameters
Table 4.3.27 Multi-function digital input setting (03-00 to 03-05) (
“O”:Enable, “X”:Disable)
Value
Function
Description
Control Mode
Name
LCD Display
V/F SLV
PM
SLV
0
Forward/Stop command 2-Wire (FWD-RUN)
2- wire Forward/Stop command
(ON: Forward operation command).
O
O
O
1
Reverse/Stop command 2-Wire (REV-RUN)
2- wire Reverse/Stop command
(ON: Reverse operation command).
O
O
O
2
Multi-speed/position
setting command 0
Muti-Spd/Pos Ref 0
Multi-Speed Reference /
Position Reference 0
O
O
O
3
Multi-speed/position
setting command 1
Muti-Spd/Pos Ref 1
Multi-Speed Reference /
Position Reference 1
O
O
O
4
Multi-speed/position
setting command 2
Muti-Spd/Pos Ref 2
Multi-Speed Reference /
Position Reference 2
O
O
O
5
Multi-speed/position
setting command 3
Muti-Spd/Pos Ref 3
Multi-Speed Reference /
Position Reference 3
O
O
O
6
Forward jog run
command
FJOG
ON: Forward operation in jog mode (00-18).
O
O
O
7
Reverse jog run
command
RJOG
ON: Reverse operation in jog mode (00-18).
O
O
O
8
UP frequency increasing
command
UP command
ON: Increase output frequency (Up/Down
Function, only active when
DOWN command is programmed).
O
O
O
9
DOWN frequency
decreasing command
DOWN command
ON: Decrease output frequency (Up/Down
Function, only active when ON
command is programmed).
O
O
O
10
Acceleration/deceleration
time selection 2
Acc/Decel Time
Selection 1
Acceleration/deceleration time selection
command 1
O
O
O
11
Inhibit Acceleration
/deceleration command
ACC/DEC Inhibit
ON: Acceleration/ deceleration prohibition
O
O
O
12
Main/ Alternative Run
Switch Function
Run Change Sel
Run Command Source is set in parameter
of alternative frequency command (00-03)
O
O
O
