TechniSat DigiCorder T1, Operating Manual

Page: 47 / 61

Favourites list, and will be added only to the Total list.
> Use the left/right arrow keys to select whether you
wish to include the programmes in sorted or
unsorted order.
> Confirm by pressing OK .
Please note any further messages displayed on
screen.
> Press the Menu key to revert to normal operation.
> Independently of whether you have chosen to include
the programmes found into the Favourites list, you can
also still include these in the Favourites list manually,
as described in Chapter 8.1.
9.5 Service settings
You can at all times revert to the default settings pre-pro-
grammed at the factory. Also, should the programme list be
outdated by virtue of the many changes effected by program-
me providers, you can delete the programme list completely,
to be followed by a new programme scan. Please note that, if
you have performed the delete function, you must then start
a programme scan, and must copy the desired programmes
from the Total list to the Favourites list.
>
Use the Menu key to call up the Main Menu.
(Fig. 9-20)
> Now use the up/down arrow keys to mark the menu
line Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
(Fig. 9-21)
> Use the up/down arrow keys to mark the menu line
Service settings.
> Confirm by pressing OK.
The sub-menu Service settings will be displayed.
(Fig. 9-22)
9.5.1 Activate default setting
When this function is selected, the default settings pre-pro-
grammed at the factory are activated again, your own set-
tings are deleted, and the installation assistant AutoInstall will
be started.
>
Use the up/down arrow keys to mark the line
Activate default setting.
> Press OK.
The following prompt will appear: “Do you really want
to activate the default setting?”.
> Use the left/right arrow keys to select Yes or Abort.
> Confirm your selection by pressing OK.
47
(Fig. 9-20)
(Fig. 9-22)
(Fig. 9-21)