TechniSat DigiCorder T1, Operating Manual

Page: 36 / 61

> Once you have found the desired place in the recor-
ding, press the
yellow function key to revert to nor-
mal Play operation.
8.2.4 Ending Play
> If you wish to stop playing a recording, press the
green function key . The playback function is termina-
ted and your receiver reverts to normal operation.
8.3 Managing the hard drive
> Press the Menu key to display the Main Menu.
> Use the up/down arrow keys to mark the line Hard
drive organizing.
> Confirm by pressing OK. The menu Hard drive organi-
zing will be displayed. (Fig. 8-4)
> Use the up/down arrow keys to move the markers
around within the menu, and to change the various
positions.
8.3.1 Managing recordings
In this menu (Fig. 8-5) you have the opportunity to manage
your recordings.
>
Press OK to go to the sub-menu Manage recordings.
A list will be displayed showing all the recordings on
the hard drive.
> Use the up/down arrow keys to mark the desired pro-
gramme.
8.3.1.1 Delete
> To delete the selected recording, press the red func-
tion key Delete.
> Confirm the following message by pressing OK , to
actually delete the recording.
8.3.1.2 Parental control
You can block access to recordings that are not suitable for
children or adolescents. These recordings can then be played
back only after entry of the 4-digit unit PIN code. For the
parental control function to be active, it must be switched on
as described in Point 8.3.
>
To block access to the marked recording, press the
green function key. The selected recording will then
be marked as blocked, indicated by the parental con-
trol symbol.
8.3.1.3 Editing
> Press the yellow function key Editing to go to the
menu related to editing of the marked hard drive recor-
ding.
> Use the coloured keys to go directly to specific sec-
tions of the recording.
> Press the green function key to open a window sho-
wing the available functions.
> Use the up/down arrow keys to select the desired
function, and confirm by pressing
OK.
36
(Fig. 8-5)
(Fig. 8-4)