you have approx. 3 seconds time after pressing a key to
complete the entry.
If you wish to enter a number consisting of only one or two
digits, you can speed up the switching procedure by holding
down the key a little longer on the last digit.
7.2.3 Using the Navigator (Programme list)
>
Press
OK
.
The programme list navigator will be displayed. In TV
mode, only TV programmes will be shown, while only
radio programmes will be shown while in Radio mode.
The currently selected programme will be highlighted.
(Fig. 7-1)
>
Now, use the
up/down arrow keys
to mark the
selected programme.
>
Press
OK
to switch reception to the desired programme.
>
Use the
up/down arrow keys
to move around the list
one programme slot at a time.
>
Use the
left/right arrow keys
to move around the list
one page at a time.
7.2.3.1 Selecting a list
To facilitate the finding of programmes, your receiver is
equipped with several programme lists. You have the choice
of selecting your Favourites list (see Point 8.1), or you can
use the alphabetically sorted Total list, or you can view a list
sorted by Providers.
>
Press
OK
. The active programme list will be display-
ed.
>
Now use the
red
function key
Category
to open a
window displaying the programme list types
(Favourites list, Providers list
and
Total list)
. The
active type of programme list will be highlighted.
(Fig. 7-2)
In addition, the entry Hard drive recordings will be
shown, allowing you to access the hard drive naviga-
tor (Point 7.15.2).
>
Use the
up/down arrow keys
to select a programme
list type, e.g. Total list.
>
Confirm by pressing
OK
.
The alphabetically sorted total list will be displayed,
containing all programmes. (Fig. 7-3)
>
Use the
up/down arrow keys
to select the program-
me you wish to view or listen to.
>
Confirm by pressing
OK
.
or
>
Press the
green
function key
PVR
to go directly to the
hard drive navigator.
19
(Fig. 7-1)
(Fig. 7-2)
(Fig. 7-3)
Summary of Contents for DigiCorder T1
Page 57: ...57...
Page 61: ...61 DigiCorder T1...
