PICO-IMX6 REV. A1. HARDWARE MANUAL
– VER 1.01 – JAN 28 2016
Page
30
of
64
3.4. Digital Display Sub-System (DSS) or TTL Interface
The Parallel Display interface of PICO-IMX6 is derived directly from the DI0 port of the IPU, effectively
bypassing all the i.MX6 integrated display bridges.
Each DI port supports the following:
Compatible with MIPI-DPI standard.
Supports BT.656 (8-bit) and BT.1120 (16-bit) protocols.
Supports HDTV standards SMPTE274 (1080i/p) and SMPTE296 (720p)
Scan Order: progressive or interlaced
Synchronization:
Programmable horizontal and vertical synchronization output signals
Data enabling output signal
The combined data rate for the two DI ports is up to 240 MP/sec
Supported pixel data formats:
RGB - color depth fully configurable; up to 8 bits/value (color component)
YUV 4:2:2, 8 bits/value
All mandatory formats in MIPI DBI, DPI and DSI
For examples of valid mappings, please refer to the “IPU Display Interface Signal Mapping” chapter of the
i.MX6 datasheet.
