PICO-IMX6 REV. A1. HARDWARE MANUAL
– VER 1.01 – JAN 28 2016
Page
32
of
64
3.5. MIPI Display
The PICO-IMX6 provides MIPI Serial Interface camera signals.
The MIPI DSI Host Controller supports the following features:
IPU SIDE (input):
Compliant with MIPI Alliance Specification for Display Serial Interface (DSI), Version 1.01.00 - 21
February 2008
Fully Compliant with MIPI Alliance Standard for Display Pixel Interface (DPI-2), Version 2.00 15
September 2005 with Pixel Data bus width up to 24bits
Compliant with MIPI Alliance Standard for Display Bus Interface (DBI-2) Version 2.00 - 29
November 2005.
Supported DBI types are:
Type B
16bit, 9bit and 8bit Data bus width
DBI and DPI interface can coexist (only one is operational at a time)
Support all commands defined in MIPI Alliance Specification for Display Command Set (DCS),
Version 1.02.00 - 23 July 2009
D-PHY side (output):
Interface with MIPI D-PHY following PHY Protocol Interface (PPI), as defined in MIPI Alliance
Specification for D-PHY, Version 1.00.00 - 14 May 2009
Supports up to 2 D-PHY Data Lanes:
Bidirectional Communication and Escape Mode Support through Data Lane 0.
Programmable display resolutions, from 160x120(QQVGA) to 1024x768(XVGA).
Multiple Peripheral Support capability, configurable Virtual Channels.
Video Mode Pixel Formats, 16bpp(RGB565), 18bpp(RGB666) packed, 18bpp(RGB666) loosely,
24bpp(RGB888).
For additional details, please refer to the “MIPI DSI Host Controller” chapter of the “i.MX6 Reference
Manual”.
Table 10 - MIPI Display Signal Description
PIN
CPU
BALL
CPU PAD NAME
Signal
V
I/O Description
X2_53
G1
DSI_D0P
DSI_D0P
2V5
O
MIPI Display Serial Interface
data pair 0 positive signal
X2_55
G2
DSI_D0M
DSI_D0M
2V5
O
MIPI Display Serial Interface
data pair 0 negative signal
X2_57
H1
DSI_D1P
DSI_D1P
2V5
O
MIPI Display Serial Interface
data pair 1 positive signal
X2_59
H2
DSI_D1M
DSI_D1M
2V5
O
MIPI Display Serial Interface
data pair 1 negative signal
X2_61
H3
DSI_CLK0M
DSI_CLK0M
2V5
O
MIPI Display Serial Interface
clock pair negative signal
X2_63
H4
DSI_CLK0P
DSI_CLK0P
2V5
O
MIPI Display Serial Interface
clock pair positive signal
