PICO-IMX6 REV. A1. HARDWARE MANUAL
– VER 1.01 – JAN 28 2016
Page
46
of
64
3.19. Input Power Requirements
The PICO-IMX6 is designed to be driven with a single input power rail.
The power domain pins have to be connected as follow:
All GND pins have to be connected to the carrier board ground pane.
All VSYS pins should be connected to the main power source.
Table 26 - Input Power Signals
Power Rail
Nominal Input
Input Range
Maximum Input Ripple
VSYS (4 pin)
5V
+4.2V - +5.25V
±50 mV
3.19.1. Power Management Signals
The PICO-IMX6 has the following set of signals to control the system power states such as the power-on
and reset conditions. This enables the system designer to implement a fully ACPI compliant system
supporting system states.
Table 27 - Power Management Signals
PIN
CPU
BALL
CPU PAD NAME
Signal
V
I/O Description
E1_17
D12
ONOFF
ON_OFF
3V3
I
Power ON button input signal
E1_36
C11
POR_B
nRESETOUT
1V8
I/O
General Purpose Input
Output