9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
2.35
5. Measure
gap
with
a
wire
gauge.
Refer
to
specifications in picture below for proper spark plug
type and gap. Adjust gap if necessary by bending the
side electrode carefully.
Spark Plug Gap:
0.030-0.037 in. (0.84 +/– 0.08 mm)
6. If necessary, replace spark plug with proper type.
CAUTION
Severe engine damage may occur if the incorrect spark
plug is used.
7. Install spark plugs and torque to specification.
Recommended Spark Plug:
Autolite 5924
TORQUE
Spark Plug:
9 ft-lbs (12 Nm)
Do Not Apply Anti-seize
8. Install spark plug wire into spark plug / engine.
MAIN FRAME/ENGINE GROUND
Inspect engine ground cable connections
q
. Be sure
ground wires are tight and not corroded. The main
chassis ground can be found below the fuse box under
the driver’s seat base.
Summary of Contents for G0-010-00
Page 60: ...2 36 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES MAINTENANCE...
Page 196: ...4 48 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES FUEL SYSTEM...
Page 224: ...5 28 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES CVT SYSTEM...
