9.14
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
FRONT CALIPER REMOVAL
1. Elevate and support front of machine.
CAUTION
Use care when supporting vehicle so that it does not tip
or fall. Severe injury may occur if machine tips or falls.
2. Remove the front wheel.
3. Remove brake line from the caliper. Place a container
under caliper to catch fluid draining from brake line.
4. Remove brake caliper mounting bolts and caliper.
FRONT CALIPER DISASSEMBLY
1. Remove brake pad adjuster screw
q
.
2. Push upper pad retainer pin inward and slip brake
pads past edge, if pads are still installed.
3. Remove mounting bracket
w
and dust boot
e
.
4. Remove piston
r
and square O-rings
t
from the
caliper body
y
.
5. Clean the caliper body, piston, and retaining bracket
with brake cleaner or alcohol.
NOTE
Be sure to clean seal grooves in caliper body.
FRONT CALIPER INSPECTION
1. Inspect caliper body for nicks, scratches or wear.
Measure bore size and compare to specifications.
Replace if damage is evident or if worn beyond
service limit.
MEASUREMENT
Front Caliper Piston Bore I.D.:
Std. 1.5050-1.5040” (32.27-30.202 mm)
Service Limit 1.5060” (38.252 mm)
Summary of Contents for G0-010-00
Page 60: ...2 36 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES MAINTENANCE...
Page 196: ...4 48 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES FUEL SYSTEM...
Page 224: ...5 28 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES CVT SYSTEM...
