5.18
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
BEARING INSPECTION
1.
Rotate the clutch bearing in both clockwise and
counter-clockwise directions.
• The non-braking bearing should rotate both directions
on the shaft with only a slight amount of drag.
2.
Verify there is no binding or rough spots. If problems
are noted continue with disassembly.
CLUTCH INSPECTION
NOTICE
Remove cover, spring, and spider following instructions
for drive clutch removal, then proceed as follows:
1.
Remove the moveable sheave spacer sleeve
q
.
Inspect for damage and wear.
2.
Remove the moveable clutch sheave
w
. Inspect for
damage and wear.
Summary of Contents for G0-010-00
Page 60: ...2 36 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES MAINTENANCE...
Page 196: ...4 48 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES FUEL SYSTEM...
Page 224: ...5 28 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES CVT SYSTEM...
