9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
3.79
10. Install the oil pump sprockets, chain, washer and
new
bolts
o
. Oil pump sprockets must be installed in the
correct position, with the word “
OUT
” facing out.
11. Torque sprocket bolts to specification.
TORQUE
Oil Pump Sprocket Bolt:
9 ft-lbs (12 Nm)
FLUID CAPACITY
Oil Capacity:
Approx. 2 Quarts (1.9 L)
Oil Filter Wrench:
PU-50105 or 2.5” (64 mm)
Oil Type:
5W-50
Synthetic Engine Oil
Oil Pressure
Minimum Specification:
(using 5W-50 full synthetic at operating temperature)
10 PSI @ 1200 RPM(Minimum)
40 PSI @ 7000 RPM(Minimum)
12. Prepare Inter (mag) and mag side crank case by
clean all mating surfaces.
13. Apply a thin film of Crankcase Sealant evenly to a
clean and oil-free MAG crankcase mating surface.
Crankcase 3 Bond Sealant:
2871557
14. Install the inter (mag) crankcase bolts finger tight in
MAG side crankcase.
15. Tighten all bolts evenly until snug.
16. Torque the
new
crankcase bolts to in sequence to
specification.
TORQUE
Intermediate Mag Cover:
9 ft-lb (12 Nm)
Summary of Contents for G0-010-00
Page 60: ...2 36 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES MAINTENANCE...
Page 196: ...4 48 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES FUEL SYSTEM...
Page 224: ...5 28 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES CVT SYSTEM...
