3.76
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
OIL PUMP REMOVAL
1. Remove the fasteners
q
retaining the intermediate
(mag) portion of the crank case
w
and remove this
section of the crank case.
2. Rotate the crankshaft to TDC position by aligning the
timing hole
w
in crankcase with a timing hole in the
crankshaft. Insert a 1/4” drive socket extension
through the crankcase and into the crankshaft
locating hole.
3. Remove the oil pump sprocket bolts
e
and washers.
Discard the bolts and replace with new for assembly.
Remove the sprockets and chain
r
from the engine.
4. Inspect the oil pump chain for worn or missing rollers
or damage. Chain should be replaced as a set with
sprockets if sprocket teeth are worn.
NOTICE
The larger oil pump sprocket
t
mounts to the balance
shaft extension, the smaller oil pump sprocket
y
mounts to the oil pump shaft.
5. Remove the upper oil pump sprocket spacer
u
.
6. Remove the three bolts
i
securing the oil pump
cover to the crankcase.
Summary of Contents for G0-010-00
Page 60: ...2 36 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES MAINTENANCE...
Page 196: ...4 48 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES FUEL SYSTEM...
Page 224: ...5 28 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES CVT SYSTEM...
