3 - Preparation
Making connections
Connecting audio equipment
The following is an example of connections with this unit.
Precautions before making connections
o
Carefully read the operation manuals of the devices to be connected and then connect them correctly.
o
Before making connections, turn this unit and all equipment to be connected off (standby).
o
Install all connected devices, including this unit, so that they are powered from the same line. When using a power strip or similar device, be sure to
use one that has high current capacity (thick cable) in order to minimize fluctuations in power voltage.
V
CAUTION
Before turning the power on or connecting audio equipment, set the following knobs and faders on this unit and the knobs and faders of the devices
being connected to their lowest values. Failure to do so could cause sudden loud noises from monitoring equipment, and this could damage the
equipment or harm hearing.
o
Channel faders (
e
), PHONES – knobs (
6
), MONITOR OUT knob (
5
)
Connection example
Back
Front
Note: For details about
q
–
g
in the illustration above, See "Top panel" on page 5 and See "Rear panel" on page 6.
8
TASCAM Mixcast 4
