2 - Names and Functions of Parts
Home Screen
When the unit is turned on, the Home Screen appears on the touchscreen as shown below.
As a rule, touchscreen operations are either touching an icon with a finger (hereafter, “tap”) or moving left/right on the screen (hereafter, “swipe”). (If the
response to fingers is poor, operation using a stylus designed for smartphones and tablets is also possible.)
This screen allows input signal levels to be monitored and shows the operation status of the unit. In addition, various function settings can be accessed by
tapping the Menu icon on the screen.
Applause
Drumbeat
Alarm
AirHorn
Brass
Heartbeat
Bleep
Effect
1
Menu icon
Tap this icon to open the Menu Screen.
(See "Menu Screen" on page 27.)
2
Recorder operation status
This icon shows the recorder operation status.
Indicator
Meaning
8
Stop
0
Recording
09
Recording paused
3
Recording counter
This shows the current elapsed time (in hours: minutes: seconds)
when recording.
4
SD counter
This shows the remaining time available for recording on the SD card
(in hours: minutes: seconds).
5
USB icon
The
icon appears when connected by USB.
6
Bluetooth icon
The
icon appears when a Bluetooth device is connected.
The
icon blinks when waiting to pair.
7
SD card icon
When an SD card is loaded, the
icon appears.
8
Level meters
These show the levels of the channels.
o
1 - 4, , , ,
7
: Levels sent to the stereo mix
o
L/R
: Stereo mix levels
9
Input channel identifiers
Indicator
Corresponding input jacks
1 – 4
MIC INPUT 1-4 jacks
USB port
LINE IN (TRRS) jack
Bluetooth input
Sound pads
L/R
2MIX
e
SOUND PAD bank indicator
The position of the SOUND PAD bank currently shown is highlighted.
q
Condenser mic selected indicator
Red dots will be shown next to mic channel numbers set to
“Condenser” in the mic settings.
w
Sound Pad display
These show the names of the audio files that have been assigned to
the Sound Pads.*
Use the dedicated software to set audio sources.
(See "Sound Pad overview" on page 23.)
* Pre-assigned effect sounds (included audio sources) are set for the
Bank 0 Sound Pads.
e
SOUND PAD bank switch(
/
) icons
Tap the icon to switch to the lower bank. Tap the icon to switch to
the higher bank.
TASCAM Mixcast 4
7