manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 90 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 90

TANDBERG 7000 MXP 

76 

 

3.11.1 

 Presentation Key 

 

 
The quickest way to show a presentation is to use the presentation key on the remote control. 
The presentation key is used to start and stop a presentation. The presentation key will display 
PC (default*).  
 
When holding the presentation key for 1 second, the presentation menu will be displayed. This 
menu allows you to choose other video sources.  
 
You can also find the Presentation button in the Menu on screen. Select Presentation button and 
press OK on remote control. 
 
The default presentation source can be permanently changed in 

Presentation Settings

. 

 
When using the presentation key, your presentation will be displayed as a 

Dual Stream

, if 

possible. If the call does not support a dual video stream, the presentation will display as main 
video stream. 

 
How to start and end a Presentation using the Presentation key: 

1.  Press the Presentation key. The video source that is set as presentation source is 

displayed in full screen (PC is default). Remember to connect your 

PC

 to the codec in 

advance. 

2.  Press the Presentation key again to end the presentation and go back to main camera. 

 
 

* If available on your system. 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments