manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 5 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 5

User Manual 

v 

 

 

 

 
 

Disclaimer 

The information in this document is furnished for informational purposes only, is subject to 
change without prior notice, and should not be construed as a commitment by TANDBERG. The 
information in this document is believed to be accurate and reliable; however TANDBERG 
assumes no responsibility or liability for any errors or inaccuracies that may appear in this 
document, nor for any infringements of patents or other rights of third parties resulting from its 
use. No license is granted under any patents or patent rights of TANDBERG. 
 
This document was written by the Research and Development Department of TANDBERG, 
Norway. We are committed to maintain a high level of quality in all our documentation. Towards 
this effort, we welcome you to 

Contact us

 with comments and suggestions regarding the content 

and structure of this document. 
 

Patent information 

TANDBERG technology described in this manual is protected by one or more of the following 
U.S. Patent No. 5,584,077 - 5,838,664 - 5,600,646 - 7,010,119 - 7,034,860 and other patents are 
pending in the United States and/or other countries. 
 
 
 

 

COPYRIGHT © 2005–2006, TANDBERG 

 

snprintf  

Copyright 1999, Mark Martinec. 

[email protected]

 All rights reserved  

Snprintf is distributed under the terms of the snprintf license, which is a Frontier Artistic style open source license. 

A standard copy of snprintf can be located at the author’s web site: http://www.ijs.si/software/snprintf/ 

 

xSupplicant (wpa_supplicant) 802.1x   

Copyright (c) 2002-2005, Jouni Malinen 

[email protected]

 

xSupplicant is distributed under the terms of the xSupplicant license, which is a BSD style open source license.  

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments