manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 213 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 213

Administrator Settings 

199 

 

 

5.8.1.1 ISDN-BRI Settings  

 

 

To make sure your system will work properly using ISDN-BRI, make the following settings: 
 

1.  Set ISDN switch type 
2.  Enter ISDN line numbers (+ SPIDs if required) 
3.  Disable unused lines  

 
Some software versions do not support 6 ISDN lines, therefore some of the Line Setup entries 
may be grayed out.  

ISDN BRI switch type  

Select the type of ISDN network connected to your unit. Note that 1TR6 should only be used if 
you are operating the system behind a PABX.

 

 

 

Line setup 

This menu allows you to program the numbers associated with your ISDN line.

 

If you want to use 

this ISDN line, you need to set Enabled On and enter the numbers of your ISDN line. If some of 
the ISDN lines are not to be used, set Enabled Off. Line 1 should always be enabled. National 
ISDN and AT&T Custom ISDN might require SPID numbers associated with your ISDN numbers. 
If you have received two different SPID (Service Profile IDentifier) numbers for each ISDN line 
from your network provider, you must program both of them. 
 

 

Example:

  

 

 

 

 

Numbers 

 

SPIDS

 

ISDN BRI 1:

 

67838498 
67838498 

016783849800 
016783849810 

ISDN BRI 2:

 

23478060   
23478070  

012347806000  
012347807000 

ISDN BRI 3:

 

23478420 
23478430 

012347842000 
012347843000 

ISDN BRI 4:

 

23478520 
23478530 

012347852000 
012347853000 

ISDN BRI 5:

 

23478540 
23478550 

012347854000 
012347855000 

ISDN BRI 6:

 

23478560 
23478570  

012347856000 
012347857000 
 

                 

             

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments