manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 235 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 235

Administrator Settings 

221 

 

5.8.2.4 SNMP Settings 

 

    

 

SNMP Settings 

 
SNMP Trap Host identifies the IP-address of the SNMP manager. SNMP (Simple Network 
Management Protocol, SNMP Ver 1) is used for monitoring and configuring of different entities in 
a network. The system's SNMP Agent

 

responds to requests from SNMP Managers

 

(a PC 

program etc.). SNMP traps are generated by the agent to inform the manager about important 
events. 
  
Traps can be sent to multiple SNMP Trap Hosts. Enter the IP address of up to three SNMP 
managers. All traps will then be sent to the hosts listed. 
SNMP Community names are used to authenticate SNMP requests. SNMP requests must have a 
‘password’ in order to receive a response from the SNMP agent in the codec. Note that the 
SNMP Community name is case sensitive. The default password is "public". 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments