manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 237 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 237

Administrator Settings 

223 

 

5.8.2.6 Quality of Service 

 

 

QoS Type

 

 

Off  

No QoS is used. 
 

Diffserv 

Diffserv QoS method is used. Please see below for details. 
 

IP 
Precedence  

IP Precedence QoS method is used. Please see below for details. 
 

 
 

IP Precedence Video

 

  
Used to define which priority audio, video, data and signaling should have in the network. The 
higher the number, the higher the priority. The priority ranges from 0(off) - 7 for each type of 
packets. 
 
Auto will provide the following priority: 
 

 
Audio  
Video 
Data  
Signaling  

 
4 
4 
3 
6 
 

 
IP Type of Service (TOS) helps a router select a routing path when multiple paths are available. 
 

Delay 

 

Tells the router to minimize the delay. 

Throughput

       

 

Tells the router to maximize the throughput. 

Reliability

  

 

Tells the router to maximize the reliability. 

Cost  

 

Tells the router to minimize the cost. 

 
 

IP Precedence Telephony

 

  
Used to define which priority audio should have in the network for telephone calls. The higher the 
number, the higher the priority. The priority ranges from 0(off) - 7 for each type of packets. 
 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments