manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 194 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 194

TANDBERG 7000 MXP 

180 

 
Note that if Stereo Speakers are enabled in the menu without having any stereo speakers 
connected to the Digital NAM, it may cause the acoustic echo-canceller to malfunction. 
 

 

 
If the system is 

connected to a Digital NAM

, stereo sound on the loudspeakers shall be 

present if a stereo input signal is connected to the inputs VCR-Left and VCR-Right or a stereo 
signal is received from the Far End.  
 
If the system is 

not connected to a Digital NAM

, stereo sound on the loudspeaker outputs 

will be present in the following situations: 

ƒ

 

If system is idle and a stereo input signal is connected to the inputs VCR-Left and 
VCR-Right. 

ƒ

 

If system is in a call with mic off and a stereo input signal is connected to the inputs 
VCR-Left and VCR-Right, or a stereo signal is received from the Far End. 

ƒ

 

Otherwise the Loudspeaker Left signal will be equal to Loudspeaker Right. 

 
 

 
 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments