manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 187 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 187

Administrator Settings 

173 

Level Settings 

 
It is possible to adjust the audio input levels according to which external audio equipment is 
connected. The on-screen audio level indicator will make it easier to set the correct input level 
settings. The input level should be adjusted so that the average level reaches the transition 
between the green and the yellow area. The audio inputs are adjustable in steps of 1.5 dB from 0 
dB to 22.5 dB.  
 
 

 

 
 
To help adjusting the input levels there is also a Peak Performance meter showing the peak 
audio volume for each of the audio inputs. The level should be adjusted so that the Peak 
Performance meter never reaches the maximum value to avoid the acoustic echo canceller to 
malfunction due to overload of the microphone. 
 
The default levels for Mic 1,2 and 3 are set for use with an Audio Technica AT871R or AT841R 
microphone in an average videoconferencing room. The gain can be adjusted correctly for a wide 
range of microphones. 
 
A few examples of microphone levels are: 
 
Audio Technica AT871R        +3dB (default) 
Audio Technica AT841R        +3dB 

 
TANDBERG Audio Science:

  

Audio Technica AT-861PZ     +3dB 
Crown PZM-6D                     +19.5dB 
 
                  
Audio inputs 4, 5 and 6 are set to a default level which is adhered to by most manufacturers 
of audio-visual equipment and is a level at which most audio-visual equipment (CD-players, 
VCRs or DVDs) will work. 
 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments