manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 289 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 289

Glossary 

275 

 

Appendix 10: Connecting the System 
to ISDN using NT1 Network Adapters 

 

 

Connecting the system to ISDN using NT1 network 
adapters

 

 

Connecting 

Connect the first ISDN cable from ISDN 1 on the system to the S-interface on your first 
NT1 network adapter. Connect the other ISDN cables to the appropriate NT1 network 
adapters. Connect the U-interface of your NT1 adapter to the line provided from your 
network provider. 
 
For convenience the NT1 adapters could be placed inside the cabinet. If needed, use 
the shorter ISDN cable (RJ45 connectors) delivered with the NT1 between the codec 
and the NT1 and the longer ISDN cable between the NT1 and the connector (RJ45) at 
the wall socket. 
 

Configuring 

The configuration of the system is performed in the same manner as described in 
ISDN BRI Settings. 
 
The NT1 should be powered up and you should check that the network is active. 
Please check your NT1 User Manual. 
 
 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments