manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 239 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 239

Administrator Settings 

225 

 

 

5.8.2.7 IEEE 802.1x 

 

 

802.1X 

 
The system may be connected to an IEEE  802.1x LAN network. Supported 802.1x protocols are 
EAP-MD5, EAP-PEAP and EAP-TTLS. The 802.1x authentication are enabled by setting 802.1x 
Mode to On. 
 

On 

 802.1x authentication enabled 
 

Off 

 802.1x authentication disabled 
 

 

Anonymous Identity

 

The 802.1x Anonymous ID string is to be used as unencrypted identity with EAP types that 
support different tunneled identity, EAP-PEAP and EAP-TTLS. The anonymous ID, if set, will be 
used for the initial (unencrypted) EAP Identity Request. 
 

Identity 

The 802.1x Username is the username needed for 802.1x authentication. 
 

Password

 

The 802.1x Password is the password needed for 802.1x authentication. 
  

EAP-MD5 

On 

The EAP-MD5 protocol is enabled 
 

Off 

The EAP-MD5 protocol is disabled 
 

 

EAP_TTLS 

On 

The EAP_TTLS protocol is enabled 
 

Off 

The EAP_TTLS protocol is disabled 
 

 

EAP-PEAP 

On 

The EAP_PEAP protocol is enabled 
 

Off 

The EAP_PEAP protocol is disabled 
 

 
Note that 802.1x wireless LAN is not supported. 
 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments