manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 57 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 57

Administrator Settings 

43 

 

3.5.3 Call 

Settings 

 

 
The Call Settings specifies the quality of the call. Each call will be set up with the default Call 
Settings if the settings are not altered. Normally it is not necessary for the user to alter the 
settings.  
 
The Call Settings are defined in Control Panel - Call Quality - Default Call Settings. 
 
When setting up a call in the Make a Call menu: 
 

1. Select 

the 

Call Settings

 field for the participant and press the OK button on the remote 

control.  

2.  Make desired changes to Network, Bandwidth and Restrict (56k). If this is to be the new 

default call settings, select Set as Default in the menu.  

3.  Select the OK icon and press the OK button on the remote control. 

 

 

 
It is possible to make the changes made to the 

Call Settings

 default by selecting Set as Default 

and OK. These settings will now be the default settings for all future manually dialed calls. 
 
These settings are also available in the menu Control Panel - Call Quality - Default Call Settings. 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments