Home
/
TANDBERG
/
7000 MXP
/
User Manual

TANDBERG 7000 MXP, User Manual, Page: 159 / 332

Share

Page: 159 / 332

TANDBERG 7000 MXP User Manual Download Page 159

Administrator Settings

145

Kiosk Mode - Auto Dial*

On

The system will automatically dial to the first contact in the Phone Book when he
handset is lifted. If this contact is busy, the system will call the second number in the
Phone Book and so on. If the user places the handset in the cradle, the system will
switch to Speaker Mode. Only the Far End system can end the call.

Off

The system will not make a call automatically when the handset is lifted.

* Applies only to systems with handset

Kiosk Mode - Allow Use of Remote Control

Yes

All keys on the remote control are enabled.

No

All keys except the arrow keys and OK key are disabled.

Kiosk Mode - Phone Book

Local

The system will use the Local Phone Book in Kiosk Mode.

Corporate

The system will use the Corporate Directory in Kiosk Mode.

Kiosk Mode - Kiosk Menu

On

The Kiosk Mode menus will appear on the screen.

Off

No menus or indicators will appear on the screen.

«
...
157
158
159
160
161
...
»

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments