manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 208 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 208

TANDBERG 7000 MXP 

194 

 

5.7.2 Encryption 

Mode 

 

 

Auto

    

 

The system will try to use the most secure encryption - AES, dependent on the 
capabilities of the other sites. For sites that do not support AES encryption, DES 
encryption will be tried. 
 

AES

  

The system will try to use AES with 128 bits encryption when setting up calls. If AES 
is not supported by the other site(s), no other type of encryption will be initiated.  
 

DES 

The system will always try to set up the call using DES with 56 bits encryption on 
ISDN and IP. If all other sites do not support DES, no other type of encryption will be 
initiated.  
 

 
Both AES and DES Encryption are supported for mixed ISDN/IP calls. In addition AES -and DES 
Encrypted sites can be connected at the same time. 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments