manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 53 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 53

Administrator Settings 

39 

3.5 Make a Call 

 

 
 

It is easy to make a call: 
 

1.  Press the green Call button on remote control and Dial number 

 

2.  Press the green Call button again to initiate the call 

 
 
 
Display the call menu by either: 

1.  Select Make a Call from the menu, or 
2.  Press the green Call button on the remote control 

 
The TANDBERG system can make both 

Video calls

 and 

Telephone calls

. 

 

Call Settings

 specifies the quality of the call. It is possible to alter the default call settings for the 

current call if required. The Call Settings are defined in Control Panel - Call Quality - Default Call 
Settings.  
 
It is possible to start 

Streaming

 from this menu. 

   

For setting up a MultiSite conference, see 

Add Call

 for more details.  

•

 

If the system has an embedded MCU (Multipoint Control Unit) you can set up a Multisite 
conference.  

 

 

 
The Phonebook and Call Type Selector icons are placed to the right of the Dial Number entry 
field. 
 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments