manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 284 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 284

TANDBERG 7000 MXP 

270 

mechanisms employed by TANDBERG are: AES, DES, H.233, H234 and H.235 (H235v3 & v2 for 
backwards compatibility) with extended Diffie Hellman key distribution via H.320, H.323 and 
Leased Line connections. 
 
The TANDBERG AES implementation is validated as conforming to the Advanced Encryption 
Standard (AES) Algorithm, as specified in Federal Information Processing Standard Publication 
197, 

Advanced Encryption Standard,

 

by The National Institute of Standards and Technology 

(NIST). 

IEEE 802.1x / EAP (Extensible Authentication Protocol)

  

This is a standard for authentication and authorization of units/systems onto the network. 
 
Static configuration 

ƒ

 

System ID and Password 

ƒ

 

Anonymous ID for encryption challenge 

ƒ

 Enable 

methods 

 
Supported methods 

ƒ

 

MD5  (simple challenge) 

ƒ

 

PEAP (encrypted channel) 

ƒ

 TTLS 

 
Note that 802.1x wireless LAN is not supported. 
 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments