manualshive.com logo in svg

TANDBERG 7000 MXP, User Manual, Page: 100 / 332

Share
Download
TANDBERG 7000 MXP User Manual Download Page 100

TANDBERG 7000 MXP 

86 

 

3.12.1 

 Request Floor and Release Floor 

 

 
When requesting floor, your video will be broadcasted in full screen to all other participants in the 
conference. Request Floor is useful when you want to speak or display something in front of all 
participants. 
 
Release Floor when you are done and make the floor available for other participants in the 
conference. An indicator appears when you have floor and disappears when you release floor, 
see floor indicator in 

On-screen Indicators

.  

 

How to use Request and Release Floor: 
 

1.  Open the Menu by pressing OK. 
2.  Choose Conference Services and press OK. 
3.  Choose Request Floor and press OK. A Floor indicator will appear when you have floor. 
4.  When done, press the same button again, which now means Release Floor. The Floor 

indicator disappears. 

Summary of Contents for 7000 MXP













































































































































































































































































































































Reviews:

No comments