TANDBERG 7000 MXP User Manual Download Page 285

Page: 285 / 332

Glossary

271

Appendix 6: Using the File System

Using the file system

It is possible to access a file system within the TANDBERG system by using ftp:

DOS-
window:

ftp <IP-address of system>, or

Web-
browser:

ftp:// <IP-address of system>

Description of the different files:

all.prm

all settings in the system (including directory)

dir.prm

directory entries (up to 200 entries)

event.log

logs fault situations etc.

sw.pkg

the system software

globdir.prm

file containing up to 400 entries. These entries can not be edited from the
system, but can be edited as a text-file.

Files accessible only by ‘ftp get /tmp/snapshots/xxx.jpg’ or ‘http://<IP-address of
system>/tmp/snapshots/xxx.jpg’:

site0.jpg

Snapshot of current stream if MultiSite.

main.jpg

Snapshot of selfview.

site1.jpg

Snapshot of decoded stream if point-to-point.

duo.jpg

Snapshot of the encoded stream if transmitting DuoVideo, the decoded stream if
receiving DuoVideo.

Custom logos

Go to the folder where your logo is located.

Type “ftp <IP-address of your local system>”.

Go to the user folder, type “cd user”.

Upload the logo, type "put <logo.jpg>".

The new logo will be displayed the next time you restart your system. Recommended maximum
size is: 704x576, file-format: jpg. If the file is too large, no logo will be displayed.

Summary of Contents for 7000 MXP













































































































































































































































































































































Search results

Summary of Contents for 7000 MXP

Reviews:

TANDBERG 7000 MXP, User Manual, Page: 285 / 332

Search results

Summary of Contents for 7000 MXP

Reviews: