manualshive.com logo in svg

TallyGenicom 9045N, Service Manual

Share
Download
TallyGenicom 9045N Service Manual Download Page 291

1 - 107

Chapter 3 Removal and Replacement Procedures (RRPs)

RRP6.7

HARNESS ASSEMBLY FUSER (PL 6.1)

Removal

1)

Remove the COVER REAR 500 (PL 7.1) (RRP7.9).

2)

Remove the COVER REAR (PL 1.1) (RRP1.1).

3)

Remove the FUSER ASSEMBLY (PL 6.1) (RRP6.8).

4)

Remove the COVER LEFT (PL 1.1) (RRP1.3).

5)

Remove the COVER RIGHT (PL 1.1) (RRP1.2).

6)

Remove the COVER EXIT 500 (PL 1.1) (RRP7.1).

7)

Remove the 500 EXIT ASSEMBLY (PL 7.1) (RRP7.2).

8)

Remove the COVER TOP (PL 1.1) (RRP1.4).

9)

Remove the COVER FRONT (PL 1.1) (RRP1.5).

10) Remove the BTR ASSEMBLY (PL 6.1) (RRP6.9).
11) Remove the DUCT FRONT (PL 6.1) (RRP6.2).
12) Remove the ROS ASSEMBLY (PL 6.1) (RRP6.1).

Be careful not to drop or strike the ROS Assembly with any tools or other objects.

13) Remove the SHIELD PLATE ROS (PL 6.1) (RRP6.3).
14) Remove the GUIDE TRAY LEFT (PL 5.1) (RRP5.8).
15) Remove the MOTOR COVER (PL 8.1) (RRP8.1).
16) Remove the SHIELD PLATE LVPS (PL 9.1) (RRP8.1).
17) Remove the GUIDE CRU LEFT (PL 6.1) (RRP6.4).
18) Release the hooks securing the COVER GUIDE CRU (PL 6.1) to the GUIDE CRU LEFT, and 

remove the COVER GUIDE CRU together with the HARNESS ASSEMBLY FUSER (Figure 1).

Be careful handling the hooks of the GUIDE CRU LEFT. They are fragile and could break 
if widen to much.

Figure 1. Fuser Harness Assembly

Summary of Contents for 9045N










































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands